MSO8202T – Osciloscopio Digital 2 Canales 200 MHz+ Analizador Lógico 16 Canales Owon

CARACTERÍSTICAS PRINCIPALES:

2 in 1 (DSO + LA)
+ 8 inch color LCD
+ USB data transmission supported
+ 20 automated measurements
Digital Storage Oscilloscope
+ Bandwidth : 200MHz
+ Sample rate : 2 GS/s
+ Auto-scale function

DESCARGAR MANUAL DESCARGAR FICHA TÉCNICA 

DESCARGAR SOFTWARE OSCILOSCOPIO DESCARGAR SOFTWARE ANALIZADOR

El osciloscopio y el analizador lógico de 16 canales admiten múltiples modos de disparo, incluidos bus, estado, alineación de datos, ancho de datos, trenza distribuida, etc.

FUNCIONES TÉCNICAS DEL OSCILOSCOPIO

Bandwidth 200MHz
Sample Rate 2 GS/s
Rise Time =1.7ns
Display 8» color LCD , 640 x 480 pixels
Channel dual + external trigger
Horizontal Scale (s/div) 1ns/div – 100s/div, step by 1 – 2 – 5
DC Accuracy (average) average>16 : (3% reading + 0.05div) for DeltaV
Vertical Sensitivity 2mV/div – 10V/div
DC Gain Accuracy :3%
Vertical Resolution (A/D) 8 bits (2 channels simultaneously)
Interpolation sin(x)/x
Max Input Voltage 400V (DC + AC peak)
Probe Attenuation Factor 1X,10X,100X,1000X
Trigger Mode Edge, Video, Alternate, Pulse, and Slope
Acquisition Mode Normal, Peak Detect, and Average
Record Length 2M points
Waveform Storage 4 waveforms
Automatic Measurement
Vpp, Vavg, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Preshoot,
Rise Time, Fall Time, Delay A:B , Delay A:B , +Width, -Width, +Duty, -Duty
Waveform Math +, -, *, /, invert, FFT
Power Supply 100 – 240V AC, 50Hz / 60Hz, CAT II

FUNCIONES TÉCNICAS DEL ANALIZADOR LÓGICO

Sample Rate 20S/s – 1GS/s
Bandwidth 200MHz
Channel 16
Record Length 4M points
Input Impedance 660KO : 5%, in parallel with 15 : 5pF
Trigger Mode Edge, Bus, State, Data Alignment, Data Width, and Distributed Queue
Trigger Position Setting Pre-trigger, Mid-trigger, and Re-trigger
Threshold Voltage :6V (4 settings)
Input Signal Range :30V
Data Search available
Data System binary, decimal, and hex
Digital Filter 0, 1, 2 optional
Setting Storage 10 settings
USB Flash Disk Storage available

INCLUYE

– Cable de alimentación
– Cable USB
– CD Rom con el software
– Manual de usuario en español
– 2 Puntas de prueba x1:x10
-modulo de analizador lógico
-Bolso opcional